Brakes/Levers/Pads

Avid's flyweight X0 stoppers are powerful enough to stop you on a dime and sensitive enough to modulate you down the trickiest descents. With Avid's Contact Point Adjustment, Power Reserve Geometry, and lever reach adjust it's simple and easy to choose between the modulation of a longer throw or the instantaneous power of a short throw. Combine that with Avid's Deep Stroke Modulation and TaperBore technology that gives you incredible control over these hugely powerful brakes and you have some of the most customizable, controllable stoppers around. And, perfect installation has never been easier thanks to Avid's renowned Tri-Align Caliper Positioning System. The X0 also comes spec'd with Avid's HS1 rotor.

- Clearly defined bite point and maximum power make it the first choice for gravity and high-speed pilots - 1-finger HC lever blade modulates the enormous braking power as desired - Suitable for mounting left or right

Magura MT7 HC3 Disc Brake and lever - front or rear hydraulic post mount black/orange - The Magura MT7 Disc Brake and HC3 Lever Set is a high-performance hydraulic brake system. - Carbotecture SL radial master cylinder - Monobloc triple arch quad piston caliper - HC3 1 finger alloy lever blade features adjustable reach & leverage ratio - Flip-flop easy bleed design - Utlizes a performance 4-pad system

The Magura MT8 Raceline Disc Brake is a high-performance brake system designed for cross country and marathon racing. - The lever's brake master is crafted from Carbotecture SL - a composite material that is not only light, but also extremely resistant thanks to its embedded carbon fibers - The 1-finger HC carbon lever blade is lighter and more rigid than aluminum, while also offering high braking power thanks to its ergonomic design - The 2-piston caliper of the MT8 Raceline is forged from one single piece, offering a lightweight, high braking power and stability - Lever can be mounted on either the left or the right, thanks to its flip-flop design - Reach can be adjusted with a 3mm hex key - Designed for use with Royal Blood hydraulic fluid (mineral oil based)

SRAM's Force 1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between rider and bike and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side rear hydraulic-brake carbon lever has the same shape and feel as the Force 1 right lever, but has no shift paddle. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The brakes themselves provide incredible modulation and stopping power. You'll never go back to rim brakes again! - The moto-style set up allows you to hook up your left brake lever to your rear wheel. - Carbon fiber lever blade - Bleed port is easily accessed

SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and represents SRAM's attempt at perfecting braking performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!

SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precision braking and shifting performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM Force 22 is designed to work with 11-speed cassettes. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!

- The Best Balance Between Rigidity, Weight And Stopping Power - More Predictable, Linear Braking Curve - Clear Contact Feeling With Better Linearity - Stabilizer Added Between Axles Work - Sleek Design - Less Gap Between Each Arms - Comfortable Riding With Wider Tire On Rough Road - Better Clearance With Wider Tire - Compatible With 28C Tire Size

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000, even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads